An extra heavy wall of 1/4" thickness with working pressure up to 420 PSI. Heavy duty couplings. Same threads as iron pipe. This pipe is recommended to depths of 350 ft. Best deal is the whole string of plastic pipe. Next best is to install the lower joints that stand in water. End rust problems, as well as mineral deposit problems. Very light weight, easy to handle. Our urethane rod guides should be used on sucker rods with plastic pipe.

Available in: 2" Thread and Couplings .218" wall thickness 400 PSI 2-1/2" Thread and Couplings .276" wall thickness 420 PSI 3" Thread and Couplings .300" wall thickness 370 PSI

Rod guide for 1-1/8" wood rod to go into 2" pipe; Rod guide for 1-3/8" wood rod to go into 2-1/2" pipe; Rod guide for 1-3/8" wood rod to go into 3" pipe; Rod guide for 1-5/8" wood rod to go into 3" pipe; Also available for metal rods.

Virden Perma-Bilt's sucker rod guides are attached by chrome plated spiraled nails. They will not rust or come loose from the wooden rod! Rod guides are epoxied to metal rods for lifetime fit. Urethane material does not wear away. Does not wear the pipe. Rod guides never allow the wood rod or the iron couplings to touch the pipe. Wood rods can last 20-30 years. Normally two guides are placed on each strong sucker rod, one near the iron coupling; one at the middle part of the rod. EASILY INSTALLED BY ANYONE.

ELIMINATE PIPE SLAP! These Virden Perma-Bilt Pipe Stabilizers are without a doubt one of the best investments you can put in your well hole. They are made from the same durable material that our famous windmill cups are made from. There is no way your column pipe can come in contact with the casing wall. Put one on the last joint of your string of pipe and one in the middle of your string of pipe.

Pipe Stabilizers for 6" casing. 2", 2-1/2", and 3" available.

Virden's Urethane pipe stem cover cap with built-in rod guide consists of a rod guide for all sucker rods at the pipe stem, does not allow wear from hitting pipe, and a urethane cover cap that keeps all debris and foreign matter from getting into the down column pipe, preventing cylinder barrel damage, etc.

Simply press fit over the top of the pipe stem. It will never come off or allow debris into the pipe. Will not interfere with sucker rod travel at all. Will last a lifetime.

The rod guide never allows the sucker rod to wear the pipe or itself. Straight true strokes. For all rod sizes, wooden rods: large and small, steel rod, fiberglass rod, etc.

Combination pipe stem cap and rod guides are available in 1-1/4" 2.", 2-1/2" and 3" column down pipe sizes.

Made from Virden's Urethane that made the rod guides, pump cups, and barrel liners famous. 6" to 8" in length. Heavy wall, will never wear out.