Available in 1-7/8" for 2" pipe, 2-1/4" for 2-1/2" pipe, 2-3/4" for 3" pipe. Screws on to steel or PVC. Exact dimensions: 24" long by 1-7/8", 2-1/4", or 2-3/4" inside diameter. Bottom checks drops and presses into bottom cap, just like brass. 30" and 36" working barrels available upon request Virden Perma-Bilt Engineering Department is now offering 1-7/8" x 24" windmill cylinder barrels with caps at one-third the price they are selling now. These barrels and caps are made from thick heavy wall PVC and then lined with our durable urethane/epoxy. These windmill working barrels are as good as any brass barrels on the market. The thick wear resistant urethane/epoxy lining assures long life and true check strokes. Our PVC urethane/epoxy lined Perma barrel connects right to your pipe (steel or PVC). These durable urethane/epoxy lined barrels are doing a wonderful job right now. The revolutionary breakthrough of Virden Perma-Bilt urethane/epoxy, which is used to line the PVC working barrel, and the ingenious method of the actual lining process, is what makes the windmill barrel a true value in this day of climbing costs! A brass barrel and caps can be at least 3 times higher than our urethane/epoxy lined Perma barrel. Our 24" length allows up to 2 changes of stroke and even these will be far in between. These Perma barrels can be used with pump jacks. We also have a simulated windmill pump in operation in our showroom, which operates 365 days a year with our Virden Perma Barrel for your inspection. Old style black jack leathers can be used, but we definitely recommend our life-time urethane Perma cups and urethane cast checks. Black jack leathers and brass can be used. ALL BRASS WELL CYLINDERS & VALVES For those of you who insist on brass products, we still offer a complete line of brass checks, top & bottom caps, and barrels (all sizes). We definitely recommend using our urethane cups, as they are also made to fit various sizes of brass stems. Special sizes available upon request. All our brass checks come with our Urethane cups and balls. Barrels only, Top & Bottom caps, Top & Bottom valves with urethane cups and balls, complete, 1-7/8" x 30", 2-1/4" x 30", 2-3/4" x 30". EZ Pull Well cylinders 42" long with 4 leather plungers. Standing check valve comes out when rods are pulled. Available in 1-7/8", 2-1/4", and 2-3/4" sizes.

Guaranteed Urethane/Epoxy Tensile Strength Specs: Tensile Modulus -- 314,000 PSI Tensile Strength -- 2% off set 6,200 PSI Tensile Break -- 7,400 PSI These Specs are far greater than are needed for working barrels up to 350 feet. 25% less rubbing friction compared to brass. Virden Perma-Bilt Engineering department will line any size PVC pipe with our durable urethane/epoxy to make a special working barrel to fit your particular need.